|  contact

Glass forming machine 54/012

One spindle – glass forming machine semi-automatic

Item number: VV1-00381

The machine consists of a solid, electrically welded machine housing. A two-spar guide bed with solid machine base is installed at the right side. The drive of the working spindles which run on ball bearings is effected by steplessly variable D.C. motor.


An immediate locking of the working spindles after having switched-off the machine can be achieved by means of an electro-magnetic brake which can either be switched-on or switched-off. Thus the operation of three-jaw ring chucks is facilitated.


When switching-on the machine, the brake releases automatically.

The feeding of the glass parts to be worked is carried out manually. The whole operational cycle is effected fully automatic according to the designed input programs.


Technical Details



  • PLC controlled operation cycles – easily programmable, depending on the execution different programs can be stored at the control unit
  • connection of modem for remote control possible
  • high capacity, high accuracy by means of fined adjustment of forming tools and thus constantly, close tolerances and low grinding times
  • handling of machine by semi-skilled personnel, whereby one person can handle two or three machines, depending on operation hours of program
  • application of oil- or air-cooled tools is possible.
Spindle bore122 mm
Bed length1400 mm
Centre height300 mm
Steplessly variable speed rangemax. 500 1/min

Download this manual as PDF-Document.



Vacuum chucking device consisting of: Dry-running vacuum pump with vacuum adjusting valve for delivery of air with normal humidity and dry gases up to an ultimate pressure (absolute) of 150 mbar, sufficient for clamping of glass flasks up to 20 liter capacity. Vacuum shaft complete with vacuum joint and plane acceptance for acceptance of all vacuum chucking plates Unit possesses an additional eccentric ring to support the vacuum shaft within the machine spindle Approx. 2 meters vacuum hose Electrical supply: Single-phase A.C. current 230 Volt, 50 Hz