|  contact

Quartz burner SSQ 141/18

Surface mix

Item number: SSQ 141/18

 

WS - hydrogen, oxygen

 

with radially adjusted burner heads made of quartz glass. For hydrogen and oxygen, alternatively with 3,4,5 or 6 burner heads. With 5 burner heads and more with medial supply on both sides

 

Construction:

Burner heads made of quartz glass, they could be swivelled via ball joint, base made of stainless steel with inner thread 1/4“, feeding pipes alternatively to 1/4“ inner thread, to needle valves with hose glands or to swivel-screws (see below mentioned).

 

Advantages:

no metallic abrasion

low noise working method

concentrated, homogeneous flame formation

no-water cooling required even during continuous operation

 

For the acceptance of burners we recommend the burner holders according to our cat.-no. 141/18/35 - 141/18/37 (depending on centre height of the machine).

 

 

Models:

 

SSQ 141/18/23

with 3 burner heads, connection to 1/4“ inner thread

 

SSQ 141/18/24

with 4 burner heads, connection to 1/4“ inner thread

 

SSQ 141/18/25

with 5 burner heads, connection on both sides to 1/4“ inner thread

 

SSQ 141/18/26

with 6 burner heads, connection on both sides to 1/4“ inner thread

 

 

SSQ 141/18/3

with 3 burner heads, with two needle valves and hose glands made of stainless steel

 

SSQ 141/18/4

with 4 burner heads, with two needle valves and hose glands made of stainless steel

 

SSQ 141/18/5

with 5 burner heads, with two needle valves and hose glands made of stainless steel

 

SSQ 141/18/6

with 6 burner heads, with two needle valves and hose glands made of stainless steel

 

 

SSQ 141/18/3.2

with 3 burner heads, with swivel screws, with clamping ring connection for tube dia. 10 mm

 

SSQ 141/18/4.2

with 4 burner heads, with swivel screws, with clamping ring connection for tube dia. 10 mm

 

SSQ 141/18/5.2

with 5 burner heads, with swivel screws on both sides, with clamping ring connection for tube dia. 10 mm

 

 

SSQ 141/18/6.2

with 6 burner heads, with swivel screws on both sides, with clamping ring connection for tube dia. 10 mm

 

For further details please refer to the table.

 

 

Downloads

Manual

Download this manual as PDF-Document.