Item number: VV1-00036
The machine consists of a solid, electrically welded machine housing. A two-spar guide bed with solid machine base is installed at the right side. The drive of the working spindles which run on ball bearings is effected by steplessly variable D.C. motor.
An immediate locking of the working spindles after having switched-off the machine can be achieved by means of an electro-magnetic brake which can either be switched-on or switched-off. Thus the operation of three-jaw ring chucks is facilitated.
When switching-on the machine, the brake releases automatically.
The feeding of the glass parts to be worked is carried out manually. The whole operational cycle is effected fully automatic according to the designed input programs.
| Spindle bore | 62 mm |
|---|---|
| Bed length | 1400 mm |
| Centre height | 250 mm |
| Steplessly variable speed range | max. 1000 1/min |
Vacuum chucking device consisting of: Dry-running vacuum pump with vacuum adjusting valve for delivery of air with normal humidity and dry gases up to an ultimate pressure (absolute) of 150 mbar, sufficient for clamping of glass flasks up to 20 liter capacity. Vacuum shaft complete with vacuum joint and plane acceptance for acceptance of all vacuum chucking plates Unit possesses an additional eccentric ring to support the vacuum shaft within the machine spindle Approx. 2 meters vacuum hose Electrical supply: Single-phase A.C. current 230 Volt, 50 Hz
