Design:
The swivelling process is done electrically, via strong threaded lifting spindle, the lifting process can be interrupted in each tilting position, so that also between horizontal and vertical position each working position is possible. The left working head is moveable; therefore it is also possible to adjust a convenient working height in vertical position. The right working head has counter balances with a tension chain, so that in each swivelling position an easy and sensitive transport is guaranteed. Counter balance for support at surcharge upon request.
Both working spindles can be switched on and off via lamina clutch.
Further options:
The machines are normally quoted with ring chucks. Upon request other clamping devices can be used. In addition the machines can be equipped with automatic advances, burner gas supply, blowing air -, burner - and forming equipment up to fully automatic control via industrial PC (Arnold Easy Panel System AEPS)
In case of more details please contact us.
STANDARD ACCESSORIES:
1 pce. burner support (lathe carriage)
2 pcs. blowing swivels
1 pce. electromagnetic brake
1 pce. grease gun
1 set of keys
1 pce. separate control panel with all push buttons for ON/OFF, FORWARD/BACKWARD, potentiometer for speed control and control lamps mounted on four rollers for easy positioning.
Item number: VD4-00006
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00008
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00009
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00002
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00003
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00010
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00005
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00011
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: VD4-00007
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: -
Universal glass working lathes for various operations in the glass- and quartz glass industry.
Item number: -
Universal glass working lathes for various operations in the glass- and quartz glass industry.
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 300 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindel bore: | 82 mm |
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 450 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindle bore: | 82 mm |
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 600 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindle bore: | 82 mm |
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 300 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindle bore: | 112 mm |
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 450 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindle bore: | 112 mm |
| Speed range: | 3-300 1/min |
|---|---|
| Centre height above burner support: | 600 mm |
| Working length between spindle flanges: | 1200 mm |
| Spindle bore: | 112 mm |
| Speed range: | 3-250 1/min |
|---|---|
| Centre height above burner support: | 450 mm |
| Working length between spindle flanges: | 1600 mm |
| Spindle bore: | 125 mm |
| Speed range: | 3-250 1/min |
|---|---|
| Centre height above burner support: | 600 mm |
| Working length between spindle flanges: | 1600 mm |
| Spindle bore: | 125 mm |
| Speed range: | 3-250 1/min |
|---|---|
| Centre height above burner support: | 450 mm |
| Working length between spindle flanges: | 1600 mm |
| Spindle bore: | 162 mm |
| Speed range: | 3-250 1/min |
|---|---|
| Centre height above burner support: | 600 mm |
| Working length between spindle flanges: | 1600 mm |
| Spindle bore: | 162 mm |
| Speed range: | 3-200 1/min |
|---|---|
| Centre height above burner support: | 600 mm |
| Working length between spindle flanges: | 1600 mm |
| Spindle bore: | 200 mm |
Dual round bar guide bed which is open at side and in tilt resistant execution, for extreme stability and for highest precision in vertical position of the machines.
Foot switch with flexible steel coated connector cable for spindle ON/OFF
Foot switch with flexible steel connector cable for spindle ON/OFF and stepless control of speed
